Simple enough for most preschoolers to do on their own, this bird feeder may attract a few local birds which will have your child entertained with plenty of learning opportunity. A small list of supplies is needed and chances are you may already have them around your home.
Supplies needed:
2-3 paper plates
3 12 inch long pieces of twine, yarn, or sturdy string
4-5 brads (or, in a pinch, staples)
Hole punch
Bird seed
Directions:
Step 1: Layer the 2-3 paper plates together and press the brads through them all, evenly around the rim of the plates. (If you don't have brads, you can staple the plates together)
Step 2: In between the brads, make three evenly spaced holes with the hole punch (Not too close to the edge). Tie one end of a string through one hole, and repeat for other two holes and strings.
Step 3: Gather the loose ends of all three string up at the top and tie together to make a loop for hanging. Be sure to make it strong enough not to fall apart, and also make sure the plates hang flat when held by that loop.
Step 4: Fill the plates with some bird seed and hang out in the yard to attract and feed the birds.

Hint: The weight of the birdseed may cause the plates to droop a little, creating a bowl shape for the seed. It will still work just fine.
Hint: If it's windy weather outside, smear a thin layer of peanut butter on the top of the plate first, then sprinkle a thin layer of bird seed all over it. That way the wind won't flow the food away.
Tip: For a more fun looking feeder, you can paint the plates and/or use colored yarn.
Top Mommy Blogs - Vote for us @ TopMommyBlogs.Com!
Supplies needed:
2-3 paper plates
3 12 inch long pieces of twine, yarn, or sturdy string
4-5 brads (or, in a pinch, staples)
Hole punch
Bird seed
Directions:
Step 1: Layer the 2-3 paper plates together and press the brads through them all, evenly around the rim of the plates. (If you don't have brads, you can staple the plates together)
Step 2: In between the brads, make three evenly spaced holes with the hole punch (Not too close to the edge). Tie one end of a string through one hole, and repeat for other two holes and strings.
Step 3: Gather the loose ends of all three string up at the top and tie together to make a loop for hanging. Be sure to make it strong enough not to fall apart, and also make sure the plates hang flat when held by that loop.
Step 4: Fill the plates with some bird seed and hang out in the yard to attract and feed the birds.
Hint: The weight of the birdseed may cause the plates to droop a little, creating a bowl shape for the seed. It will still work just fine.
Hint: If it's windy weather outside, smear a thin layer of peanut butter on the top of the plate first, then sprinkle a thin layer of bird seed all over it. That way the wind won't flow the food away.
Tip: For a more fun looking feeder, you can paint the plates and/or use colored yarn.
Top Mommy Blogs - Vote for us @ TopMommyBlogs.Com!
No comments:
Post a Comment